BEVINSEE 9006 HB4 COB LED Headlights Kit Low Beam 6000LM 6000K Super White Bulbs

Features:

• COB Chips: New COB high power high brightness chips per bulb.
• 2 sides: 2 Side LED Offering 360° Light Beam
• 0.1s Instant Start up: Soft light, No dark spot.
• 6500K white beam: natural beam pattern,a mass of clear white light with high penetration in the rain,foggy,dust days.
• CANBUS ERROR FREE: No. For most vehicles, just directly plug and play. But for some vehicles with CAN-BUS system, decoder or load resistor may be required to avoid hyper flash or fast blinking.

Specification:

• Brand: Bevinsee
• Bulbs Size:9006/HB4
• Wattage:50W/Pair; 25W /Bulb
• Color Temperature: 6000K White
• Lumens: 6000LM /Pair;3000LM /Bulb
• Operating Temperature: -40°C ~ +80°C
• Waterproof Rating: IP67 Waterproof
• Package Including: 2pcs LED Light Bulbs

Before buying:

• Pls pay attention to the size of our LED bulbs.
• You may need to replace the modified dust cover.
• Please pay attention to whether the installation location space is enough.
• This model don't come with CANBUS Error Free function, Please contact us if you need CANBUS model.
• For some Vehicle models, when installing the H7 LED bulbs,you may need some specially modified/customized adapters/holders/buckles of headlamp for your vehicle,which is to fit the LED bulb correctly!!!

Notice:
1.both side could not work?
please turn around the plug (swap the polarity) and try again
2.One side could not work?
1)please turn around the plug (swap the polarity) of the defective bulb and try again
2)please exchange the bulbs from side to side and see if the problem could solve
3)Please check your connection and fuse
4)If still could not help, please contact our customer service, we will get back to you within 24 working hours
3.both side flicker/interference/error light?
Pls kindly noted that your car need a resistor Cancelers Decoders, you can contact our customer service for help
4.My bulb type is H7, but the one you sent could not fit?
Pls kindly noted that your car need a bulb holder to lock the bulb, you can get one from ebay according to you vehicle model
5.My bulb type is H1, but there is only one clip on my bulb and the one you sent has two clip
Pls kindly noted that different cars have different connection way, which some have both positive and negative electrode, while some just have positive electrode but not negative. if there is just positive electrode but not negative, please connect the positive side, as for the negative wire, please connect to the car's metal shell.
6.the bulbs is loss and it could not fit(H8/H9/H11/9005)
Please put the bulb in the bulb assembly, and make sure to rotate the bulbs in the socket by clockwise, only by this way can install the bulbs, if you just put it in the socket, cannot stable the bulbs.
7.the bottom of the bulb is too big and it could not fit
For some special cars, you need to make a hole on the waterproof/dust cover and let the fans come out, and in this way will solve the radiating problem.